JavaScript ist deaktiviert. Für eine bessere Darstellung aktiviere bitte JavaScript in deinem Browser, bevor du fortfährst.

Auf Thema antworten

Beitrag: [QUOTE="mac, post: 511773, member: 13152"] Ich habe beim Durchwühlen des Web nach Informationen zu KSG-Mods das hier gefunden: ************************************************************* Today I made a little more of investigation about the 1C0 CCM and door modules... with and without success... I did not really found the bit for the folding mirrors and the FOB (which I am still looking for) but I found another couple of bits related with this suspended thread... I have named the new bits: - AUTO-UP capability - AUTO-DOWN capability It is located in each door module, in particular, front doors have it active, while rear doors have it.... yeah! DISABLED Before this mod makes sense, the driver's door master switch must be converted as explained in the pictures: adding springs and resistors so that it broadcasts the auto-up and auto-down message to can-bus. With the vds-pro mod, the rear motors will pick-up these messages and work (auto lift and auto-lower, exactly as front doors. The operation of rear buttons works the same, as well as auto-roll-up or auto-roll-down... no side effects observed during a lot of testing. Maybe for any other model (Audis?) there is a master switch for driver's door, fully compatible and with the auto-rear windows already done... don't know and need to ask; but you can always convert it (it takes 30 minutes or so). Ok, the nice part: We have to modify two bits in the two rear modules, so the procedure is repeated twice but with different addresses. - connect with vds pro and login (19283) - read address 16416 and take the first byte (decimal). For my passat it is 153. - convert to binary: 10011001. - set bits in bold to 1: 10011111, which is a decimal 159 in my case. - write the new value to addresses: 16416, 16461 and 16506. - repeat this for the right rear module. - read address 20512 and take the first byte. It should be the same as before: in my case it was 153. - to binary, change bolded 0s to 1s and to decimal again: 159 for me. - write the new value to addresses: 20512, 20557 and 20602. It is done! This CCM thing is gonna kill my health and my passat's battery, hehe, but you don't know how big satisfaction is to find something stupid like this... I hope that you enjoy it. Please report feedback if you succeed! Cheers! ************************************************************* Link: [url]http://forums.tdiclub.com/showthread.php?t=162624[/url] Da beschreibt jemand, wie man die Heckfenster zum automatisch hoch-/runterfahren bewegt, so wie's bei den vorderen Fenstern ist. Leider gilt das geschriebene nur für ein 1C0 KSG. Weiß zufällig jemand die entsprechenden Speicherbereiche in 1J0 KSG? Gruß, Markus (der das Tastenfeld seines Passis schon mal geupdatet hat :wink: ) [/QUOTE]

Authentifizierung: Überprüfung durch Google ReCaptcha zulassen

Es ist eine Überprüfung durch Google ReCaptcha erforderlich, diese wird durchgeführt sobald der Datenschutzerklärung zugestimmt wurde.